For Part 2 of this series, we are going to be exploring cool gear hacks and workarounds to get you rolling on a low budget. In this series as a whole, we will be discussing everything from DIY electronic builds, to great inexpensive products you may not have heard of before. With that said, let's get rolling with our first project:
DIY ELECTRIC GUITAR
If you run an electric guitar amplifier in a remote & isolated location several feet from your guitar amplifier, this buffer/linedriver is a killer solution for curing any capacitance issues you may have with your rig - thus preserving your tone. As many of you already know, the longer the 1/4" run, the more capacitance in your guitar's signal chain, and the duller the tone. This circuit cures this issue, and has no negative effects.
This ultra-simple circuit sounds so good, you'll want to leave it on all of the time. I have compared it against some of the most well known manufactured devices, and it is easily the best. Notice that I use an LM386 IC. Yes, this chip was originally developed by Texas Instruments as a 1/2 watt amplifier, but with a little know-how, and leaving out certain parts of the circuit, it makes a killer transparent boost.
The .1uf capacitor can be a cheap ceramic cap. Don't worry, your guitar won't know the difference, and neither will anyone else. The output volume control, is a 1/2 watt 100k Audio Taper potentiometer. Set the output volume of the circuit to where the tone is boosted just a hair, and this is where this buffer/linedriver is operating at its optimum level. Too much boost (which this circuit can easily do), and you'll overdrive the input of your guitar amplifier (some folks like this). Add a 3PDT stomp switch to make this a boost.
If you need an enclosure, I recommend Small Bear or Pedal Parts Plus. The total project cost is not more than $20. Super cheap & super easy to build with extraordinary results.
My personal pedalboard with the above circuit as a boost/linedriver (upper left-hand corner). I used to be the chief designer of boutique guitar pedals from 2008-2011 of a now defunct pedal company. This pedal was my very first prototype of this type of pedal. I built it out of spare parts ( that's why it's so ugly - Lol ). When I tested it out, I noticed it imparted a certain "something" to my tone that I loved. It's stayed on my board ever since.
We've been providing installation, consultation, mixing, and mastering services for 25 years. We have taught numerous conferences and workshops regarding live sound and recording.
Do you like vintage recording gear and articles? You should visit our sister site: The Vintage Audio Portal!
**Advertise With Us! We have thousands of visitors a day. Contact us here to learn more.